The versatility of Pneumatic high stress grouting pumps

Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the loose rock mass. The most grain dimension can’t exceed 0.2 mm.
Grouting pump operation and upkeep is simple, safe and reliable. This pump is used in mines operating underneath troublesome conditions as a outcome of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic stress in the air cylinder exerts a high stress on the grout combination which ends up in ejection of grout with a high strain and velocity. The valves of the air cylinder in the pump perform automatically to actuate the cylinder. เกจวัดแรงกด strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be driven even without Electrical power provide in distant areas by using engine pushed compressor.
Applications
The pump is majorly utilized in construction and mining business for injecting materials into broad and medium dimension hole in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so forth. In mining business it is used to replenish cement resolution the place there’s a hole exists between structure and rock and for soil stabilization.
Detachable design tends to simple upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively used in tunnels, coal mine, bridges and dams, constructing foundation, and other underground tasks, and inflammable, explosive sites and different bad setting.
It has software in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be used at any web site situation whether or not it’s rural or urban.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment range. Generally the ultimate amount of the grouting quantity is eight or10 instances of the quantity at first. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and flow could be adjusted based on the requirements of grouting,(The flow of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, building, mining and so on. ground/underground development.
Benefits
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small measurement, excessive efficiency, reliable performance, strain and flow control, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it might be carried easily. It is designed for easy operation and low maintenance. Last but not least its spare components are easily obtainable.
Share

Leave a Comment