The versatility of Pneumatic high stress grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the free rock mass. The maximum grain dimension cannot exceed zero.2 mm.
Grouting pump operation and upkeep is easy, safe and dependable. This pump is used in mines working underneath difficult situations as a result of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, strain gauge, pumping cylinder, outlet with fast launch coupling and wheels.
How it works
Pneumatic strain within the air cylinder exerts a excessive stress on the grout mixture which ends up in ejection of grout with a high strain and velocity. The valves of the air cylinder within the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be driven even with out Electrical power provide in remote areas by utilizing engine driven compressor.
The pump is majorly used in construction and mining business for injecting materials into wide and medium measurement gap in beams, columns ,basement partitions and flooring, lift shaft concrete wall fill-up and so on. In mining industry it’s used to replenish cement resolution the place there’s a gap exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, building basis, and other underground projects, and inflammable, explosive sites and other unhealthy setting.
It has application in chemical business also to pump out chemical slurries.
The pump is electricity free so, can be used at any web site condition whether it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally เกจวัดความดันpressuregauge of the grouting volume is 8 or10 instances of the quantity to begin with. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and move could be adjusted in accordance with the requirements of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, construction, mining and so forth. ground/underground building.
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small dimension, high effectivity, reliable efficiency, strain and move management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it can be carried simply. It is designed for straightforward operation and low upkeep. Last however not least its spare elements are easily obtainable.

Leave a Comment